Skip to content

Apps & Tools

The terminal is where most of the work happens, but the desktop around it carries its own weight. This page covers Notepad, the built-in web browser, your anonymity layers (VPN and proxy chains), and the keyboard shortcuts.

App What it is
Notepad Multi-tab notes saved to your own machine
Web Browser The darknet browser and device admin panels
VPN & Proxy Your anonymity layers around the terminal
Keyboard Shortcuts Terminal input, tabs, nano and the controller hotbar

Notepad is a multi-tab text editor for whatever you need to keep: operator notes, captured credentials, target lists, a running log of a job. Files are saved to your own machine and are not shared with a crew.

Shortcut Action
Ctrl+N New file
Ctrl+S Save current file
Ctrl+W Close current tab
Ctrl+Tab Next tab
Ctrl+Shift+Tab Previous tab
Ctrl+F Find text
Ctrl+H Find and replace
Ctrl++ / Ctrl+- Zoom in / out

Press F1 to drop the current local date and time at the cursor, ready for you to type the entry after it:

2026-09-10 09:34:

The format sorts chronologically, so a file of stamped entries reads top-to-bottom in the order things happened. Indent notes under a heading and the arrow in the left gutter collapses that section, which is handy for one file per operation with a section per target that you fold away until you need it again:

[TARGET] acme.corp
2026-09-10 09:34: rooted 10.0.0.5
creds: admin / hunter2

In plain-text files Notepad colours the things notes are made of: timestamps are dimmed so entries read as prose, IP addresses stand out because they are what you scan for, and [bracketed headings] are picked out in amber. Code files (.gd, .json, .log and so on) keep their own syntax highlighting.

The built-in darknet browser lets you access NODE network services and device admin panels. Bookmarked sites:

Address What it is
node://home Landing page with all site shortcuts
node://darkmarket.onion Hardware and software marketplace
node://localhost/rig Live hardware rig statistics
node://estates.onion Property listings and purchases
node://botnet.control Botnet C2 dashboard and DDoS booter
node://vpn.config VPN appliance settings and protocol selection
node://leakeddb.onion Breach database, search credentials by domain
node://facelink.social Social media OSINT, employee profiling
node://thewire.onion Intelligence dashboard: standings, bounties, rivals, sector intel
node://handbook.onion Vane’s Operator Handbook: tool deep-dives, footguns, defender intel

Type any IP address into the address bar to reach that device’s admin panel. Authentication is required:

  • Any device you have root on auto-authenticates with full admin access.
  • For gateways, firewalls, and switches without root, use hydra --url http://<ip> for user-level access.
  • Cracked credentials from john or hydra are accepted.
  • Some devices ship with factory default credentials, so try common combinations.
Panel What it offers
CCTV NVR camera grid with live feeds
PRINTER Print spool viewer and maintenance
GATEWAY Firewall rules and interface listing
SWITCH VLAN map, port table, traffic monitor, SPAN mirroring
CISCO Interfaces, running config, ACLs, firewall rules
LOAD BAL. Backend pools, stats, firewall rules (HAProxy / F5)
PLC SCADA register viewer and control
OTHER Generic device information panel

Each panel type offers specific actions that may generate heat, advance traces, or complete mission objectives.

All gateway types (Linux, Cisco, Firewall, Load Balancer) have a Firewall Rules tab. The critical rule is Block Internal, which must be disabled before you can discover LAN nodes via netdiscover, nmap subnet scans, or cat /etc/hosts. Disabling it adds +0.15 heat.

Multiple layers of anonymity are available to mask your real location.

A VPN subscription routes your traffic through an encrypted tunnel; purchase VPN access from the dark market. The VPN indicator on your taskbar shows connection status, and the vpn command manages it:

Command What it does
vpn --connect Establish a VPN connection
vpn --disconnect Drop the VPN
vpn --status Check connection info
vpn --scrub Flash clean firmware (after phone-home alerts)

Stolen corporate credentials can establish a remote VPN tunnel directly into a target network, bypassing the gateway entirely. Find credentials on compromised phones (vpn_config.ovpn, corporate_vpn.mobileconfig) or workstation files, then:

Command What it does
vpn --add <ip> <user> <pass> Register a remote VPN profile
vpn --connect <ip> Establish a tunnel to the gateway
vpn --disconnect Close the active tunnel
vpn --profiles List saved profiles
vpn --remove-profile <ip> Delete a profile

Connecting auto-discovers all LAN nodes behind the gateway, including VLAN segments. Only one remote tunnel can be active at a time, and the VPN type is determined by the gateway hardware (AnyConnect, IPsec, OpenVPN, or WireGuard). Adding a profile with stolen credentials generates heat, and a fed raid wipes all remote profiles.

Route traffic through compromised servers with proxychains. Each hop adds latency but makes tracing harder: the more servers in your chain, the longer it takes for investigators to trace back to you.

proxychains --tor engages a 3-hop Tor circuit on top of your existing chain. Trace algorithms run at 30% speed for about 120 seconds, a panic button for when a trace is closing in fast. There is a 10-minute cooldown after each circuit, and because exit nodes are under partial surveillance, each activation costs +0.05 heat. Re-running --tor while live shows the active hops and remaining time. It stacks with proxy chain hops, VPN, and failover, and diverts the trace walker, but it does not change who is named in logs.

The failover command rotates your IP through an LTE burner device, temporarily stalling active traces without providing permanent immunity; use it as an emergency escape when a trace is closing in. Use tunnel <ip> to establish an SSH tunnel through an exploited server, creating a bounce point for your connections.

For maximum anonymity:

1. Enable VPN
2. Set up a proxy chain through 2-3 exploited servers
3. Connect to the target
4. Clean logs on all intermediate servers when done

When a trace is closing fast, engage proxychains --tor as a panic-button diversion (about 120 seconds, 10-minute cooldown). It stacks with the layering above.

Shortcut Action
Enter Submit command
Tab Auto-complete commands and paths
Up / Down Cycle through command history
Ctrl+C Cancel operation or clear input
Ctrl+L Clear terminal screen
Ctrl+A Move cursor to beginning of line
Ctrl+E Move cursor to end of line
Ctrl+U Delete text before cursor
Ctrl+K Delete text after cursor
Ctrl+R Reverse history search
Shortcut Action
Ctrl+T New tab
Ctrl+W Close current tab
Ctrl+Tab Next tab
Ctrl+Shift+Tab Previous tab
Ctrl+Shift+C Copy selection
Ctrl+Shift+V Paste into input
Shortcut Action
Ctrl+X Exit (prompts to save)
Ctrl+O Save / Save As
Ctrl+W Search
Ctrl+\ Find and replace
Ctrl+K Cut line
Ctrl+U Paste line
Ctrl+G Show help
Ctrl+C Show cursor position
Ctrl+_ Go to line number
Ctrl+Y / Ctrl+V Page up / Page down
Ctrl+6 Toggle mark (selection)
Alt+U / Alt+E Undo / Redo
Alt+W Search next
Alt+N Toggle line numbers
Alt+S Toggle line wrapping

Click the START button or use the taskbar to switch between applications. Windows can be dragged by their title bar, resized from the bottom-right corner, minimized, and maximized. Right-click the terminal output or tab headers for context menus.

Four terminal commands can be bound to the D-pad so you can fire them without the on-screen keyboard. Run hotbar with no arguments to see the current bindings.

Command What it does
hotbar --set up scan Bind a command to up, down, left or right
hotbar --reset Restore the defaults

The defaults are nmap, logcleaner, analyze, and disconnect, the recon, cleanup and exit loop. Bindings are saved between sessions.